 |
|
|
|
Power
Potential Key Industry Equipment Requirements
Process:
Turbines (combustion, steam, hydro, wind), generators, exciters, transformers, switchgear, boilers (fluidized bed, incinerator / mass burn, fired tube, water tube), compressors, inlet air coolers, nuclear pressurized water reactor (PWR) and boiling water reactor (BWR), economizers, heaters, condensers, cooling systems, fuel handling prep/storage, burner systems, fans, water treatment.
Environmental:
Wastewater treatment, baghouse, scrubber, electrostatic precipitator, selective catalytic reduction (SCR), selective non-catalytic reduction (SNCR), low NOx burners, fire/safety systems, ash handling, CEMS, clarifier.
Project SIC Coverage
Electric Utilities (SIC Code 4911)
Electric utilities (investor owned, cooperatives, state and federal power agencies, municipalities) engaged in fossil, nuclear, cogeneration, hydroelectric, geothermal, wind, solar, tidal, pumped storage, compressed air energy storage, waste-to-energy, biomass-to-energy and landfill gas-to-energy electric generation.
Private Energy Producers (SIC Code 4931)
Private Energy Producers (independent power producers, merchant, non-utility generators) engaged in fossil, nuclear, cogeneration, hydroelectric, geothermal, wind, solar, tidal, pumped storage, compressed air energy storage, waste-to-energy, biomass-to-energy and landfill gas-to-energy electric generation.
Petroleum Refining
Potential Key Industry Equipment Requirements
Process:
Atmospheric distillation, vacuum distillation, coking, thermal operations, fluid catalytic cracking (FCUU), hydrocracking, catalytic reforming, catalytic hydrocracking, catalytic hydrotreating, alkylation, polymerization, aromatics, isomerization, lubes, hydrogen, sulfur recovery, controls (DCS/PLC), blending, compounding, packaging, calcining, wastewater treatment.
Environmental:
Electrostatic Precipitator (ESP), wastewater treatment, scrubber, stack, vapor/vent collection systems, oil water separators, thermal oxidizer, baghouse, equalization tank, CEMS, dust collection, filters, spill/containment liners, groundwater monitoring wells, vent hoods, clarifier, low NOx burners, leak detection, flare.
Project SIC Coverage
Petroleum Refining (SIC Code 2911)
Petroleum refineries engaged in straight distillation, fractionation or cracking of crude petroleum into refined petroleum products including reformulated unleaded gasoline, jet fuel, diesel, kerosene, light gases, aromatic chemicals, asphalt & asphaltic materials, benzene, fractionation products, gasoline, liquefied petroleum gases, lubricating & fuel oils, naphtha, petroleum coke, refinery gas, still oil, sulfur.
Products of Petroleum & Coal (SIC Code 2999)
Petroleum & coal product plants manufacturing products from purchased refined petroleum (except asphalt paving, roofing, saturated materials and lubricating oils and grease mfg) examples: calcined petroleum coke, fuel briquettes, petroleum waxes and petroleum jelly.
Chemical Processing
Potential Key Industry Equipment Requirements
Process:
Agitators, air separation, centrifuge, chillers, columns (adsorption, autoclave, clean-up, distillation, extraction, recycle, rectifying, separation, etc), reactors (agitated, autoclave, fluidized bed, gas phase, heated, kettles, loop, polymer, tubed, etc.), compressors (air & gas), condensers, controls (DCS/PLC), converters, coolers, crystallizers, dryers (kiln, rotary), evaporators, extruders, fractionators, furnaces, heaters, melt tanks, mixing & blending vessels, precipitators, reboilers, reformers, refrigeration, saturators, silos, towers, waste heat boilers, material handling, packaging, utilities (steam, industrial gases, water etc.).
Environmental:
Electrostatic Precipitator (ESP), wastewater treatment, scrubber, stack, vapor/vent collection systems, oil water separators, thermal oxidizer, baghouse, equalization tank, CEMS, dust collection, filters, spill containment/liners, groundwater monitoring wells, vent hoods, clarifier, low NOx burners, leak detection, flare.
Project SIC Coverage
Chorine & Alkalies (Sic Code 2812)
Alkalies & chlorine plants manufacturing chlorine and sodium hydroxide (caustic soda), and other alkalies often using an electrolysis process.
Industrial Gases (SIC Code 2813)
Industrial gas plants manufacturing industrial gases in compressed, liquid and solid forms examples: oxygen, hydrogen, nitrogen, carbon monoxide, acetylene, argon, carbon dioxide, dry ice (solid carbon dioxide), helium, neon, nitrous oxide.
Industrial Inorganic Chemicals (SIC Codes 2816-2819)
Industrial inorganic chemical plants manufacturing industrial inorganic chemicals such as inorganic dyes and pigments and basic inorganic chemicals except industrial gases (examples: alkalies, carbides, chlorine, sulfides and sulfites, activated carbon, alumina, aluminum oxide, aluminum sulfate, calcium carbide, chloride & hypochlorite, calcium compounds, chemical catalysts, chlorine, color pigments, ferric chloride, high purity grade inorganic chemicals, hydrochloric acid, hydrogen peroxide, industrial bleach, inorganic acids, inorganic laboratory chemicals, inorganic pigments, inorganic reagent grade chemicals, magnesium compounds, paint pigments, phosphates, silica gel, sodium chlorate, sodium hydroxide, sodium phosphate, sodium silicate, sodium sulfate, sulfur, sulfuric acid, titanium pigments.
Rubber, Plastics & Manmade Fibers (SIC Codes 2821-2824)
Rubber, plastics and cellulosic manmade fibers plants manufacturing plastic materials, cellulosic organic fibers and noncellulosic organic fibers, acrylic acids, acrylic fibers, alkyd resins, epoxy resins, ethylene-vinyl acetate resins, isobutylene polymers, manmade fibers, nonvulcanizable elastomers, nylon fibers, nylon resins, petroleum polymer resins, plastic molding compounds, polyester fibers, polyesters, polyethylene resins, polymerization plastics, polypropylene resins, polystyrene resins, polyurethane resins, polyvinyl chloride resins, polyvinyl resins, synthetic organic fibers, synthetic resins, synthetic rubber, urea resins, vinyl resins, vulcanizable elastomers.
Pharmaceutical & Biological Products (SIC Codes 2833-2836)
Pharmaceutical & biological plants manufacturing medicinal chemicals and botanical products (grading, grinding and milling of botanical drugs and herbs), in vivo diagnostic substances (chemical, biological or radioactive substances used for diagnostic tests performed in test tubes, petri dishes, machines etc.) and pharmaceutical preparations (ampoules, tablets, capsules, vials, ointments, powders, solutions and suspensions), biological products (vaccines, toxoids, blood fractions, and culture media of plant and animal origin), animal remedies, antibiotics, veterinarian products, vitamin preparations, vitamins.
Soaps, Detergents, Cleaners & Toilet Preparations (SIC Codes 2841-2844)
Soap, detergent, cleaners, toilet preparations plants manufacturing soaps, sanitary preparations, sulfonated oils, chlorine bleaching compounds, cleaning & polishing preparations, cosmetic creams, cosmetic lotions & oils, cosmetics, deodorants personal, detergents, disinfectants household & industrial, hair preparations, household bleaches, industrial plant disinfectants & deodorants, perfumes natural & synthetic, polishing & cleaning preparations, sanitation preparations, shampoos hair, soap, sodium hypochlorite (household bleach), surface active agents, textile finishing agents, toilet preparations, washing compounds.
Paints & Coatings (SIC Code 2851)
Paints and coatings plants mixing pigments, solvents and binders into paints and other coatings such as air curing coatings, dispersions thermoplastics & colloidal, enamels, epoxy coatings, lacquer clear & pigmented, oil paints, paint primers, paints oil & alkyd vehicle & water thinned, paints paste & dry, paints waterproof, plastics base paints & varnishes, plastisol coating compound, polyurethane coatings, primers paint, thinners paint, under coatings paint, varnish stains, varnishes, vinyl coatings strippable.
Industrial Organic Chemicals (SIC Codes 2861-2869)
Industrial organic chemical plants manufacturing gum and wood chemicals, olefins and alpha olefins, ethyl alcohol, acids organic, alcohol aromatic, benzene, butadiene, color pigments organic, cyclic intermediates, dye cyclic intermediates, dyes synthetic organic, ethylene, ethylene glycol, ethylene oxide, fatty acid esters & amines, synthetic flavors & flavoring materials, formaldehyde (formalin), high purity grade chemicals organic, industrial organic cyclic compounds, laboratory chemicals organic, methanol synthetic (methyl alcohol), acrylic organic chemicals, organic pigments (lakes & toners), organic paint pigments, phenol, organic pigments, organic plasticizers, propylene, reagent grade chemicals, rubber processing chemicals, silicones, solvents, toluene.
Agricultural Chemicals (SIC Codes 2873-2879)
Agricultural chemicals plants manufacturing nitrogenous fertilizers, manufacturing fertilizers from sewage or animal waste, phosphatic fertilizers, fertilizer mixing, pesticides, herbicides and agricultural chemicals, ammonia anhydrous, ammonium nitrate & sulfate, anhydrous ammonia, fertilizers mixed, fertilizers organic, fungicides, herbicides, insecticides, nitric acid, nitrogen solutions, pesticides, phosphoric acid, potting soil mixed, urea.
Miscellaneous Chemicals (SIC Codes 2891-2899)
Miscellaneous chemical plants manufacturing explosives, adhesives, adhesives, antifreeze compounds, carbon black, caulking compounds, chemical supplies for foundries, custom compounding of purchased resins, epoxy adhesives, explosives, fire retardant chemical preparations, foundry supplies chemical preparations, fuel tank & engine cleaning chemicals, glue, gravure ink, printing ink, metal drawing compound lubricants, metal treating compounds, oil treating compounds, plastics resin compounding, printing ink, salt, sealing compounds, water treating compounds.
Metals & Minerals
Potential Key Industry Equipment Requirements
Process:
Crushers, grinding mills, concentrator/froth flotation, separators, tailings ponds, shaking tables, screens, material handling, smelter, furnace, kiln, leaching vessels, solvent extraction, electro winning, acid plant, off-gas handling, pumps, calcining, finishing, ladle, caster, rolling mills, silos, batching equipment, lehr, glass forming machines, packaging, inspection equipment.
Environmental:
Baghouse, scrubber, spill containment/liners, vapor collection, wastewater treatment, thermal oxidizer, low NOx burners, electrostatic precipitator (ESP) additions.
Project SIC Coverage
Metal Mining (SIC Codes 1011-1099)
Metal mining, crushing, milling, metal concentration, leaching, flotation & solvent extraction for copper, gold, iron, silver, uranium, zinc or other metals.
Coal Mining (SIC Codes 1221-1231, 5052)
Underground or surface coal mining & processing of lignite, anthracite, bituminous coal and sub-bituminous coal plus coal preparation plants and terminals.
Mineral Mining (SIC Codes 1311, 1411-1499, 2899)
Solution mineral mining, quarrying, milling & processing for bentonite, gravel, kaolin, limestone, potash, open pit, underground, salt, diamonds, etc. and silica sand including oil sands.
Glass Products (SIC Codes 3211-3231)
Glass plants melting silica sand or cullet pressing, blowing or shaping of purchased glass.
Cement (SIC Code 3241)
Cement plants manufacturing portland, natural, masonry and other hydraulic cements plus cement distribution terminals.
Gypsum Products (SIC Code 3275)
Gypsum plants mfg wallboard, plasters, plasterboard or moldings.
Blast Furnaces and Steel Mills (SIC Codes 3312-3313)
Steel mills, mini-mills, coke ovens, hot rolling, pig iron mfg, mfg steel shapes and forming tube, pipe and electrometallurgical products.
Steel Wire, Pipe and Related Products (SIC Codes 3315-3317)
Cold steel rolling & processing mills producing wire, tubing, pipe and related products from purchased metals.
Iron and Steel Foundries (SIC Codes 3321-3325)
Metal foundries melting, casting, molding, machining & finishing iron or steel alloys.
Nonferrous Foundries (SIC Codes 3363-3369)
Foundries melting, casting and finishing copper, aluminum, brass, nickel, zinc, magnesium etc alloys.
Primary Copper (SIC Code 3331)
Primary copper mfg via pyrometallurgical (smelter / refining, flash furnace) or hydrometallurgical (leaching, solvent extraction, electro winning).
Primary Aluminum (SIC Code 3334)
Primary aluminum reduction and melting.
Primary Nonferrous Metals (SIC Code 3339 & 3399)
Primary nonferrous mfg other than copper and aluminum nonferrous metals by pyrometallurgical (smelting and refining), or hydrometalurgical (electrolytic methods) from ore or concentrates, zinc, nickel, brass, titanium and alloys or metal powders.
Secondary Nonferrous Metals (SIC Codes 3341)
Secondary metal processing smelting, refining and alloying of purchased scrap materials.
Nonferrous Rolling and Drawing (SIC Codes 3351-3356)
Nonferrous rolling & extrusion mills such as copper from purchased metals or recovered scrap.
Iron, Steel and Nonferrous Forgings (SIC Codes 3462-3463)
Metal forging from purchased metals into hammering mill shapes, machining, assembling and finishing (cleaning, deburring).
Metals Finishing (SIC Codes 3471-3479)
Metal finishers electroplating, plating, galvanizing and polishing of metal products.
|
|
|
|
|
|
