 |
|
|
|
Power
Potential Key Industry Equipment Requirements
Process:
Turbines (combustion, steam, hydro, wind), generators/exciters, transformers, switchgear, boilers (fluidized bed, incinerator/mass burn, fired tube, water tube), compressors, inlet air coolers, nuclear pressurized water reactor (PWR) and boiling water reactor (BWR), economizers, heaters, condensers, cooling systems, fuel handling prep/storage, burner systems, fans, water treatment.
Environmental:
Wastewater treatment, baghouse, scrubber, electrostatic precipitator, selective catalytic reduction, selective non-catalytic reduction, low NOx burners, ash handling, CEMS, stacks.
Plant & Project SIC Coverage
Electric Utilities (SIC Code 4911)
Electric utilities (investor owned, cooperatives, state and federal power agencies, municipalities) engaged in fossil, nuclear, cogeneration, hydroelectric, geothermal, wind, solar, tidal, pumped storage, compressed air energy storage, waste-to-energy, biomass-to-energy and landfill gas-to-energy electric generation.
Private Energy Producers (SIC Code 4931)
Private Energy Producers (independent power producers, merchant, non-utility generators) engaged in fossil, nuclear, cogeneration, hydroelectric, geothermal, wind, solar, tidal, pumped storage, compressed air energy storage, waste-to-energy, biomass-to-energy and landfill gas-to-energy electric generation.
Terminals
Potential Key Industry Equipment Requirements
Process:
Turbines, compressors, pumps, valves, pipelines, manifolds, loading rack, controls (DCS/PLC), SCADA monitoring, gauging/metering systems, tanks (fixed roof, internal floating roof, cone, refrigerated sphere), primary and secondary seals on tank roof.
Environmental:
Vapor collection/recovery, oil water separators, liners, dikes, containment.
Plant & Project SIC Coverage
Natural Gas Storage (SIC Code 4922)
Natural gas storage utilizing; salt dome storage caverns, depleted gas field storage or natural gas liquid refrigerated storage spheres.
Petroleum Bulk Stations & Terminals (SIC Code 5171)
Crude oil and refined product storage terminals.
Chemicals & Allied Products (SIC Code 5169)
Chemical and allied product storage terminals.
Transmission
Potential Key Industry Equipment Requirements
Process:
Compressors for gas, turbines, internal combustion engines, electric drives, pumps for liquid, control valves, piping, prover looping system, metering/gauging systems, control systems (DCS/PLC), SCADA monitoring, cathodic protection, gas coolers, condensers, generators.
Environmental:
Containment liners, noise suppression, coatings, excavation, NOx controls.
Plant & Project SIC Coverage
Crude Petroleum Pipelines (SIC Code 4612)
Crude petroleum pipelines or pump stations transporting crude oil typically from a production field to a refinery or from a terminal to a refinery.
Refined Petroleum Pipelines (SIC Code 4613)
Refined petroleum pipelines transporting refined products typically to an end user from a terminal or a refinery.
Natural Gas Transmission (SIC Code 4922)
Transmission pipelines and compressor stations transporting natural gas from a production field to a processing plant, a processing plant to an end user/storage facility or from a storage facility to an end user.
Pipe Lines (SIC Code 4619)
Other pipelines transporting water, industrial gases, chemicals and other products.Project Descriptions Grassroot construction, re-power, fuel conversion, unit and equipment additions, upgrades, retrofits, equipment replacement, combined cycle conversion, nuclear plant re-licensing, life extension, generator up-rating, NOx reduction, scrubber and electrostatic precipitator (ESP) additions, turbine refurbishments, control system upgrades, demolition and planned maintenance outages.
Production
Potential Key Industry Equipment Requirements
Process:
Hydrogen sulfide (H2S) plant, carbon dioxide (CO2) separation, amine system, glycol dehydrator, sulfur recovery, NGL storage (tank, sphere), compressors, turbines, internal combustion engines, electric drives, pumps, blowers, fractionators, boilers, reactors, furnaces, separators, absorbers, regenerators, columns, vessels, filters, condensers, control systems (DCS/PLC), SCADA monitoring.
Environmental:
Wastewater treatment, scrubbers, stack, flare, vapor/vent collection system, fire/safety system, oil water separator, spill containment/liners.
Plant & Project SIC Coverage
Crude Petroleum & Natural Gas (SIC Code 1311)
Crude petroleum, oil & natural gas processing/separation plants.
Natural Gas Liquids (SIC Code 1321)
Natural gas liquids plants producing butane, ethane, isobutane, liquefied petroleum gases, natural gas liquids, natural gasoline, propane, or sulfur.
Drilling, Oil & Gas wells (SIC Code 1381)
Natural gas and crude oil gathering facilities plus enhanced oil recovery (EOR).
Gas Production (SIC Code 4925)
Gas production, natural gas processing facilities at the gas field.
Alternative Fuels
Potential Key Industry Equipment Requirements
Process:
Hammer mills, pressure vessels, batch fermenting, atmospheric and distillation columns, evaporators, centrifuges, rotary dryers, tanks (slurry, liquefaction, clarification) storage bins, silos, dry milling, conveyors, compressors, pumps, boilers, heat exchangers, molecular sieves, control systems (DCS/PLC).
Environmental:
Wastewater treatment, stack, flare, spill containment/liners, vapor/vent collection system, fire/safety system, dust collection, baghouse, leak detection, groundwater monitoring wells, thermal oxidizer, scrubber.
Plant & Project SIC Coverage
Alternative Fuels (SIC Code 2869)
Plants engaged in the production of ethanol or methanol (from biomass). Production of Methanol, Diesel and Kerosene from synthesized natural gas.
Coal Gasification (SIC Code 1311)
Coal gasification coal liquefaction and production of liquid fuels from coal derived synthetic gas.
Petroleum Refining
Potential Key Industry Equipment Requirements
Process:
Atmospheric distillation, vacuum distillation, coking, thermal operations, fluid catalytic cracking (FCCU), catalytic reforming, catalytic hydrocracking, catalytic hydrotreating, alkylation, polymerization, aromatics, isomerization, lube oil, hydrogen, sulfur recovery, controls (DCS/PLC), asphalt, blending, compounding, packaging, calcining.
Environmental:
Electrostatic Precipitator (ESP), wastewater treatment, scrubber, stack, vapor/vent collection systems, oil water separators, thermal oxidizer, baghouse, equalization tank, CEMS, dust collection, filters, spill containment/liners, groundwater monitoring wells, vent hoods, clarifier, low NOx burners, leak detection, flare, NESHAP programs.
Plant & Project SIC Coverage
Petroleum Refining (SIC Code 2911)
Petroleum refineries engaged in straight distillation, fractionation or cracking of crude petroleum into refined petroleum products including reformulated unleaded gasoline, jet fuel, diesel, kerosene, light gases, aromatic chemicals, asphalt & asphaltic materials, benzene, fractionation products, gasoline, liquefied petroleum gases, lubricating & fuel oils, naphtha, petroleum coke, refinery gas, still oil, sulfur.
Asphalt Paving Mixtures & Blocks (SIC Code 2951)
Asphalt paving mixture plants manufacturing asphalt, tar paving mixtures and blocks from purchased asphaltic materials.
Lubricating Oils & Greases (SIC Code 2992)
Lubricating oils & grease plants blending and compounding refined petroleum and or re-refining used petroleum lubricating oils.
Products of Petroleum & Coal (SIC Code 2999)
Petroleum & coal product plants manufacturing products from purchased refined petroleum (except asphalt paving, roofing, saturated materials and lubricating oils and grease mfg) examples: calcined petroleum coke, fuel briquettes, petroleum waxes and petroleum jelly.
Chemical Processing
Potential Key Industry Equipment Requirements
Process:
Agitators, air separation, centrifuge, chillers, columns (adsorption, autoclave, clean-up, distillation, extraction, recycle, rectifying, separation, etc), reactors (agitated, autoclave, fluidized bed, gas phase, heated, kettles, loop, polymer, tubed, etc.), compressors (air & gas), condensers, controls (DCS/PLC), converters, coolers, crystallizers, dryers (kiln, rotary), evaporators, extruders, fractionators, furnaces, heaters, melt tanks, mixing & blending vessels, precipitators, reboilers, reformers, refrigeration, saturators, scrubbers, silos, towers, waste heat boilers, material handling, packaging, utilities (steam, industrial gases, water etc.)
Environmental:
Electrostatic precipitator (ESP), wastewater treatment, scrubber, stack, vapor/vent collection systems, oil water separators, thermal oxidizer, baghouse, equalization tank, CEMS, dust collection, filters, spill containment/liners, groundwater monitoring wells, vent hoods, clarifier, low NOx burners, leak detection, flare.
Plant & Project SIC Coverage
Chlorine & Alkalies (SIC Code 2812)
Alkalies & chlorine plants manufacturing chlorine and sodium hydroxide (caustic soda), and other alkalies often using an electrolysis process.
Industrial Gases (SIC Code 2813)
Industrial gas plants manufacturing industrial gases in compressed, liquid and solid forms examples: oxygen, hydrogen, nitrogen, carbon monoxide, acetylene, argon, carbon dioxide, dry ice (solid carbon dioxide), helium, neon, nitrous oxide.
Industrial Inorganic Chemicals (SIC Codes 2816-2819)
Industrial inorganic chemical plants manufacturing industrial inorganic chemicals such as inorganic dyes and pigments and basic inorganic chemicals except industrial gases (examples: alkalies, carbides, chlorine, sulfides and sulfites, activated carbon, alumina, aluminum oxide, aluminum sulfate, calcium carbide, chloride & hypochlorite, calcium compounds, chemical catalysts, chlorine, color pigments, ferric chloride, high purity grade inorganic chemicals, hydrochloric acid, hydrogen peroxide, industrial bleach, inorganic acids, inorganic laboratory chemicals, inorganic pigments, inorganic reagent grade chemicals, magnesium compounds, paint pigments, phosphates, silica gel, sodium chlorate, sodium hydroxide, sodium phosphate, sodium silicate, sodium sulfate, sulfur, sulfuric acid, titanium pigments.
Rubber, Plastics & Manmade Fibers (SIC Codes 2821-2824)
Rubber, plastics and cellulosic manmade fibers plants manufacturing plastic materials, cellulosic organic fibers and noncellulosic organic fibers, acrylic acids, acrylic fibers, alkyd resins, epoxy resins, ethylene-vinyl acetate resins, isobutylene polymers, manmade fibers, nonvulcanizable elastomers, nylon fibers, nylon resins, petroleum polymer resins, plastic molding compounds, polyester fibers, polyesters, polyethylene resins, polymerization plastics, polypropylene resins, polystyrene resins, polyurethane resins, polyvinyl chloride resins, polyvinyl resins, synthetic organic fibers, synthetic resins, synthetic rubber, urea resins, vinyl resins, vulcanizable elastomers.
Soaps, Detergents, Cleaners & Toilet Preparations (SIC Codes 2841-2844)
Soap, detergent, cleaners, toilet preparations plants manufacturing soaps, sanitary preparations, sulfonated oils, chlorine bleaching compounds, cleaning & polishing preparations, cosmetic creams, cosmetic lotions & oils, cosmetics, deodorants personal, detergents, disinfectants household & industrial, hair preparations, household bleaches, industrial plant disinfectants & deodorants, perfumes natural & synthetic, polishing & cleaning preparations, sanitation preparations, shampoos hair, soap, sodium hypochlorite (household bleach), surface active agents, textile finishing agents, toilet preparations, washing compounds.
Paints & Coatings (SIC Code 2851)
Paints and coatings plants mixing pigments, solvents and binders into paints and other coatings such as air curing coatings, dispersions thermoplastics & colloidal, enamels, epoxy coatings, lacquer clear & pigmented, oil paints, paint primers, paints oil & alkyd vehicle & water thinned, paints paste & dry, paints waterproof, plastics base paints & varnishes, plastisol coating compound, polyurethane coatings, primers paint, thinners paint, under coatings paint, varnish stains, varnishes, vinyl coatings strippable.
Industrial Organic Chemicals (SIC Codes 2861-2869)
Industrial organic chemical plants manufacturing gum and wood chemicals, olefins and alpha olefins, ethyl alcohol, acids organic, alcohol aromatic, benzene, butadiene, color pigments organic, cyclic intermediates, dye cyclic intermediates, dyes synthetic organic, ethylene, ethylene glycol, ethylene oxide, fatty acid esters & amines, synthetic flavors & flavoring materials, formaldehyde (formalin), high purity grade chemicals organic, industrial organic cyclic compounds, laboratory chemicals organic, methanol synthetic (methyl alcohol), acrylic organic chemicals, organic pigments (lakes & toners), organic paint pigments, phenol, organic pigments, organic plasticizers, propylene, reagent grade chemicals, rubber processing chemicals, silicones, solvents, toluene.
Agricultural Chemicals (SIC Codes 2873-2879)
Agricultural chemicals plants manufacturing nitrogenous fertilizers, manufacturing fertilizers from sewage or animal waste, phosphatic fertilizers, fertilizer mixing, pesticides, herbicides and agricultural chemicals, ammonia anhydrous, ammonium nitrate & sulfate, anhydrous ammonia, fertilizers mixed, fertilizers organic, fungicides, herbicides, insecticides, nitric acid, nitrogen solutions, pesticides, phosphoric acid, potting soil mixed, urea.
Custom Compounding of Purchased Resins (SIC Code 3087)
Custom compounding plants mixing and blending purchased plastic resins or reformulating resins from recycled plastic products.
Miscellaneous Chemicals (SIC Codes 2891-2899)
Miscellaneous chemical plants manufacturing explosives, adhesives, adhesives, antifreeze compounds, carbon black, caulking compounds, chemical supplies for foundries, custom compounding of purchased resins, epoxy adhesives, explosives, fire retardant chemical preparations, foundry supplies chemical preparations, fuel tank & engine cleaning chemicals, glue, gravure ink, printing ink, metal drawing compound lubricants, metal treating compounds, oil treating compounds, plastics resin compounding, printing ink, salt, sealing compounds, water treating compounds.
Metals & Minerals
Potential Key Industry Equipment Requirements
Process:
Crushers, grinding mills, concentrator/froth flotation, separators, shaking tables, screens, material handling, smelters, reduction cells, furnaces, kilns, leaching vessels, solvent extraction, electrowinning, acid plant, pumps, calciners, finishing equipment, ladles, casters, rolling mills, silos, batching equipment, lehr, glass forming machines, packaging, inspection equipment, CNC machining, refractory, hydraulic systems, motors, drives, pneumatics, conveyors, centrifuges, mixers, forging & extrusion presses, heat treating ovens, bins, hoppers, chutes, feeders, elevators, annealing & pickling equipment, process vessels, weigh scales, loaders, stackers, sand systems, dryers, burners, nozzles, DCS/PLC controls, gauges, sensors, alarms, meters, piping, conduit, boilers, turbines, switchgear, transformers.
Environmental:
Baghouse, scrubber, spill containment/liners, wastewater treatment, thermal oxidizer, low NOx burners, electrostatic precipitator (ESP), CKD (cement kiln dust) systems, dust collectors, off-gas & fume collection system, tailings ponds, monitors.
Plant & Project SIC Coverage
Metal Mining (SIC Codes 1011-1099)
Metal mining, crushing, milling, metal concentration, leaching, flotation & solvent extraction for copper, gold, iron, silver, uranium, zinc or other metals.
Coal Mining (SIC Codes 1221-1231, 5052)
Underground or surface coal mining & processing of lignite, anthracite, bituminous coal and sub-bituminous coal plus coal preparation plants and terminals.
Mineral Mining (SIC Codes 1311, 1411-1499, 2899)
Solution mineral mining, quarrying, milling & processing for bentonite, gravel, kaolin, limestone, potash, open pit, underground, salt, diamonds, etc. and silica sand including oil sands.
Glass Products (SIC Codes 3211-3231)
Glass plants melting silica sand or cullet pressing, blowing or shaping of purchased glass.
Cement (SIC Code 3241)
Cement plants manufacturing portland, natural, masonry and other hydraulic cements plus cement distribution terminals.
Gypsum Products (SIC Code 3275)
Gypsum plants mfg wallboard, plasters, plasterboard or moldings.
Lime (SIC Code 3274)
Lime plants producing lime from calcitic limestone, dolomitic limestone or other calcareous materials.
Brick and Structural Clay Tile (SIC Codes 3251-3259)
Brick & tile plants mfg brick, structural clay products, ceramic wall and floor tiles, fabricated clay refractories and refractory mortar, brick, block and tile.
Concrete Block and Products (SIC Codes 3271-3273)
Concrete product plants mfg concrete pipe, block, brick and other concrete products.
Other Minerallic Products (SIC Codes 3261-3299)
Minerallic product plants manufacturing abrasives, fiberglass insulation, clay, ceramic, stone, mineral products, vitreous china, fine earthenware, pottery, porcelain electrical supplies.
Blast Furnaces and Steel Mills (SIC Codes 3312-3313)
Steel mills, mini-mills, coke ovens, hot rolling, pig iron mfg, mfg steel shapes and forming tube, pipe and electrometallurgical products.
Steel Wire, Pipe and Related Products(SIC Codes 3315-3317)
Cold steel rolling & processing mills producing wire, tubing, pipe and related products from purchased metals.
Iron and Steel Foundries (SIC Codes 3321-3325)
Metal foundries melting, casting, molding, machining & finishing iron or steel alloys.
Nonferrous Foundries (SIC Codes 3363-3369)
Foundries melting, casting and finishing copper, aluminum, brass, nickel, zinc, magnesium etc alloys.
Primary Copper (SIC Code 3331)
Primary copper mfg via pyrometallurgical (smelter / refining, flash furnace) or hydrometallurgical (leaching, solvent extraction, electro winning).
Primary Aluminum (SIC Code 3334)
Primary aluminum reduction and melting.
Primary Nonferrous Metals (SIC Code 3339 & 3399)
Primary nonferrous mfg other than copper and aluminum nonferrous metals by pyrometallurgical (smelting and refining), or hydrometalurgical (electrolytic methods) from ore or concentrates, zinc, nickel, brass, titanium and alloys or metal powders.
Secondary Nonferrous Metals (SIC Codes 3341)
Secondary metal processing smelting, refining and alloying of purchased scrap materials.
Nonferrous Rolling and Drawing (SIC Codes 3351-3356)
Nonferrous rolling & extrusion mills such as copper from purchased metals or recovered scrap.
Iron, Steel and Nonferrous Forgings (SIC Codes 3462-3463)
Metal forging from purchased metals into hammering mill shapes, machining, assembling and finishing (cleaning, deburring).
Metals Finishing (SIC Codes 3471-3479)
Metal finishers electroplating, plating, galvanizing and polishing of metal products
Pulp, Paper & Wood
Potential Key Industry Equipment Requirements
Process:
Debarker, chipper, chip handling, digester, brownstock washer, refiner, bleach plant, chlorine dioxide plant, recausticizing equipment, evaporators, lime kiln, pulper, pulp drying, fourdrinier, deinking plant, paper machines, winder, dryer, off-machine coater, supercalender, corrugator, sheeter, flexo-folder gluer, saw line, planer, dry kiln, boilers (power, recovery), defibrator, die-cutter, fiber dryer, former, grading & sorting lines, press line, printing presses, turbine generator.
Environmental:
Electrostatic precipitator (ESP), wastewater treatment, scrubber, stack, vapor/vent collection systems, thermal oxidizer, baghouse, CEMS, dust collection, filters, spill/containment liners, clarifier, low NOx burners, leak detection, flare.
Plant & Project SIC Coverage
Pulp Mills (SIC Code 2611)
Pulp mills utilizing raw fiber and or recycled fibers to manufacture bleached recycle pulp, de-inked recycle pulp, unbleached recycle pulp or wood pulp.
Paper Mills (SIC Code 2621)
Paper mills using pulp produced on-site or purchased pulp to manufacture various grades of paper including absorbent paper, bag paper, bond paper, book paper, cover paper, facial tissue, filter paper, ground wood paper, lining paper, napkin paper, newsprint, offset paper, printing paper, publication paper, sheathing paper, text paper, tissue paper, toilet tissue, toweling paper, wrapping paper, wrapping paper, writing paper.
Paperboard Mills (SIC Code 2631)
Paperboard mills using pulp produced on-site or purchased pulp to manufacture paperboard products including boxboard, cardboard, chipboard, clay coated board, container board, folding boxboards, kraft liner board, news board, paperboard.
Saw Mills (SIC Code 2421)
Saw mills manufacturing lumber products such as dimension lumber, boards, studs, timbers, poles, ties, shingles, shakes, siding, lumber (rough, sawed or planed), studs and wood chips from logs.
Hardwood Plywood Mills (SIC Code 2435)
Hardwood plywood mills manufacturing hardwood veneer and or hardwood plywood.
Softwood Plywood Mills (SIC Code 2436)
Softwood plywood mills manufacturing softwood veneer and plywood, softwood panels and softwood plywood composites.
Reconstituted Wood Mills(SIC Code 2493)
Reconstituted wood mills manufacturing reconstituted wood sheets and boards such as laminated veneer lumber (LVL), medium density fiberboard (MDF), oriented strand board (OSB), particleboard, wafer board, hardboard and insulated board.
Converted Paper & Paperboard Products (SIC Codes 2652-2679)
Converting plants manufacturing printing paper, boxes, corrugated sheets, food cartons, consumer towel & tissue paper, pads, pallets, paper dishes, corrugated & fiberboard pads, corrugated boxes, corrugated containers, display items, fiber cans, fiber cores, fiber drums, fiber or paper tubes, folding boxes, folding cartons, food containers, milk cartons, pallets, paper cups, paper plates, paperboard boxes, partitions & sheets, sanitary containers, cellulose insulation, coated paper, corrugated paper, die-cut paper, die-cut paperboard, disposable diapers, egg cartons, envelopes, facial tissue, filing folders, filter paper, gift wrap paper, grocers bags & sacks, laminated paper, merchandise bags, merchandise bags, multi-wall bags, napkins, paper bags, paper novelties, paper rolls, paper towels, pressed & molded paper, shipping bags or sacks, tablets & pads, tissues, toilet paper etc. from purchased paper or paperboard parent rolls.
Food & Beverage
Potential Key Industry Equipment Requirements
Process:
Automated packaging (casers, crowners, filling, labelers, multi-packers, palletizing, sealing), baking ovens, boilers, compressors, conveyors (belt, pneumatic, roller), cookers, kettles, stills, coolers, freezers (blast, spiral, storage), freeze dryers, chillers, refrigeration, cutting (formers, presses, molders), dryers, evisceration equipment, irradiation systems, milling, hatcheries, greenhouses, seed conditioning, rendering, mixing and blending, offal system, steam pasteurizers, x-ray and inspection, washing/sterilization, storage (bins, grain elevators, silos, tanks), controls (DCS/PLC).
Environmental:
Wastewater treatment, baghouse, scrubber, odor controls, leak detection, containment, emissions monitoring equipment.
Plant & Project SIC Coverage
Agricultural Processing (SIC Codes 0111-0921)
Agricultural processing plants engaged in preparation and production of cash grains, crops grown under cover, crop preparation, fruits, farm dried or fresh packaged vegetables, cleaned seeds, hatcheries, hog, grown mushrooms, sorted, grated & packed fruits, sorted, grated & packed vegetables dairy and animal aquaculture.
Meat, Poultry & Fish Processing (SIC Codes 2011-2015, 2091-2092)
Meat, poultry & fish plants engaged in slaughtering, cooking & packing of beef, pork, poultry for further processing or human consumption to produce animal oils, bacon, beef, boxed beef, canned & cured crab meat, canned & cured fish, canned & cured seafood products, cooked, cured, frozen, smoked & spiced meats, cured, dried, pickled, salted & smoked fish, dried & frozen eggs, farmed chicken eggs, fish fillets, frankfurters, fresh & frozen fish, fresh & frozen sea foods, fresh & frozen shellfish, fresh & frozen shrimp, fresh crabmeat, fresh, frozen, canned or cooked chickens, hams, hatched chickens, hatched poultry, hatched poultry eggs, inedible rendering grease & tallow, inedible rendering tallow, luncheon meat, meat & bone meal, beef, meats, packaged frozen fish, packaged meat, pickled, cured, salted or smoked pork, pork, prepared frozen fish, processed eggs, processed poultry, processed turkeys, rendering grease, sausage casings, sausages, slaughtered & dressed chickens, slaughtered & dressed poultry, slaughtered & dressed turkeys, slaughtered cattle, slaughtered hogs, smoked meats, smoked, salted, dried, canned & pickled salmon.
Dairy Product Manufacturing (SIC Codes 2021-2026)
Dairy products plants engaged in processing fluid milk, cream, cottage cheese, yogurt and fermented milk to produce bottled milk, cheese spreads, pastes & cheese like preparations, concentrated, dried & powered milk, condensed & evaporated milk, cottage cheese, creamery & whey butter, creamery butter, dairy & nondairy based dietary supplements, frozen yogurt, ice cream bulk, packaged, molded & on sticks, imitation or substituted cheese, liquid or dry ice cream mix, milk, natural cheese, non frozen yogurt, processed cheese, processed milk, sour cream, whole, nonfat & butter dry milk.
Canned Specialties (SIC Codes 2032-2035)
Canned specialties plants engaged in canning and jar filling of canned food specialties, soups, pasta, canned fruit & vegetables, canned fruit juices, mixes, dinners canned fruits, canned fruits & vegetables, canned mexican foods, canned vegetables, fresh fruit or vegetable juices, jams, jellies, pickles & salted pickles, tomato based sauces.
Frozen food manufacturing (SIC Codes 2037-2038)
Frozen food plants engaged in manufacturing frozen fruit juice concentrates, frozen fruit juices, frozen fruits, fruit juices & vegetables, frozen meals, frozen native foods, frozen pizza, packaged frozen dinners, quick frozen fruits, quick frozen vegetables.
Grain milling (SIC Codes 2041-2048)
Grain milling plants engaged in production of flour, cereals, rice & bran, dough, mixes, corn milling, also includes feed mills producing pet foods, alfalfa, animal & fowl bone meal feed, animal & fowl prepared feeds, animal feeds, cat food, dog food, feed concentrates, feed premixes, feed supplements, livestock feeds, supplements & concentrates, poultry feeds, supplements & concentrates, prepared chicken feeds, stock dry feeds.
Bakery Products (SIC Codes 2051-2053)
Bakery products plants producing bread & bread type roll mixes, cakes, rolls, cookies, crackers, bagels, doughnuts, dry bakery products, dry spaghetti, flour mixes, frozen bakery products, frozen bread & rolls, macaroni & related products, noodles, partially cooked bakery products, pastries, pies, pretzels, rolls including frozen, tortillas, uncooked pasta and vermicelli.
Sugar & Confectionary Product Manufacturing (SIC Codes 2061-2068)
Sugar & confections plants engaged in processing & producing sugars, syrups, candy, chocolate bars, chewing gum, Beet Sugar, Candy Bars, Chewing Candy, Chewing Gum, Chocolate Candy, Confectionary, Raw Sugar, Solid Chocolate Candy, Solid Chocolate Candy Bars, Sugar Cane.
Grain & Oil Seed Milling (SIC Codes 2074-2079)
Oils & meals plants engaged in processing & refining of cottonseed & soybean oils, vegetable oils, tallow, fish meal, marine oils, soybean cake & meal, soybean protein concentrates, margarine or wheat flour.
Beverage Manufacturing (SIC Codes 2082-2087)
Beverage plants engaged in brewing, wine production, distilled alcohol, whiskey, soft drinks, mineral water, carbonated & non-carbonated beverages plus flavoring extracts.
Miscellaneous Food Manufacturing (SIC Codes 2091-2099)
Miscellaneous foods plants engaged in processing canned & frozen fish/seafood, snack foods, ice, noodles, mixes and seasonings, assembled & packaged sandwiches, corn chips & related snacks, dehydrated fruits, vegetables & soups, flavoring concentrates, flavoring extracts, food emulsifiers, fresh or refrigerated salads, ground coffee, instant & freeze dried coffee, malt, mayonnaise, meat seasoned sauces, meat seasonings, nuts, packaged popcorn, peanut butter, potato chips & related snacks, potato flakes & granules, prepared sauce seasonings, roasted coffee, salad dressings, soup mixes, spices, syrups, vegetable sauces, yeast.
Tobacco Product Manufacturing (SIC Codes 2111-2141)
Tobacco processing plants engaged in production and processing or cigarettes, cigars, chewing tobacco, also tobacco drying, thrashing & stemming.
Cold storage (SIC Codes 4221-4222)
Agricultural warehousing, storage & potable water supply facilities engaged in refrigerated warehousing and storage, grain elevator terminals, food distribution centers and potable water treatment plants.
Industrial Manufacturing
Potential Key Industry Equipment Requirements
Process:
Plastic (extrusion, blow molding, screw injection molding, reaction injection molding, thermoforming, rotational molding, compression molding, casting & calendaring), chillers, textile (packaging, material handling, dying, finishing, spinning, weaving), tire mfg (extruder, banbury mixers, hydraulic curing) battery (mixer, melting & holding pots, acid fill stations), presses, assembly lines, heating & cooling systems, automotive (rinsing station, anti-corrosion & electro deposition dipping baths, tandem press line, robotics, welding, tooling, paint booths, curing ovens, hard automation systems), asphalt roofing (felt machine, shingle cutters, blenders, asphalt heaters, packaging, silos), semiconductors (diffusion, ion implanting, wafer polishing, wafer chemical etching, wafer fabrication-oxidation furnace, photolithography, developers, epitaxyl and chemical vapor deposition (reactant or growth chambers), sputtering, high vacuum evaporation process, plastic packaging), circuit boards (board lamination, photographic tools, routing, drilling, cleaning & testing, electrolyses plating, photo resist coating).
Environmental:
Wastewater treatment, wet & dry scrubbers, cyclones, baghouses, thermal oxidizors, dust collectors.
Plant & Project SIC Coverage
Textile Mill Products (SIC Codes 2211-2299)
Textile mills mfg broad-woven & non-woven fabrics, finishing and dying, knitting, thread, yarn spinning, fabric coating, carpets, cotton thread, denim, hosiery, linen fabrics, non woven fabrics, pants, polyester broad woven fabrics, polypropylene broad woven fabrics, shirts, spun cotton yarn, tire cord, towels, t-shirts, underwear, & narrow fabrics.
Apparel & Fabricated Textile Products (SIC Codes 2311-2399)
Apparel mills mfg cut and sewn apparel, from woven fabric or purchased knit fabric producing Athletic clothing, brassieres, jean-cut casual slacks, jeans, shirts, slacks, sports clothing, surgical & patient gowns, underwear.
Fabricated Millwork & Wood Container Products (SIC Codes 2431-2599)
Wood product mills producing wood products from purchased feed stocks such as bathroom vanities, door coverings, door frames & sash coverings, interior & ornamental woodwork, kitchen cabinets, millwork products, mobile homes, overhead garage doors, pallet containers, portable houses, prefabricated & portable buildings, skids & pallets, staircases & stairs, turned & carved wood, window frames & sash, window units, wood boxes, wood cabinets, wood moldings, wood or metal pallets.
Furniture & Fixture Products (SIC Codes 2511-2519)
Bedside stands, dining room furniture, folding & cabinet beds, household chairs, household furniture, office & store display fixtures, office & store shelving, plastics laminated over particleboard (fixture tops), upholstered chairs, upholstered household furniture, upholstered living room furniture, wood office furniture.
Printing & Publishing (SIC Codes 2711-2799)
Printing and publishing business forms, gravure commercial printing, gummed labels & seals, job printing (lithographic & offset), lithographed labels, lithographic commercial printing, loose-leaf binders, newspaper publishing, offset commercial printing, printed labels, printed plastic bags from purchased stock.
Asphalt Felts & Coatings (SIC Code 2952)
Asphalt felt & shingle plants saturating purchased mats and felts with purchased asphaltic materials producing asphalt roofing felts, liquid & plastic roof coatings & cements, roofing felts, tar coating compounds.
Rubber & Plastic Products (SIC Codes 3011-3089)
Rubber and plastic product plants producing battery cases, belting, bottles, boxes, brake lining, bubble formed plastic packaging, cases, castings, containers, cups, custom rubber compounds, dinnerware, flat panels, foam rubber, foamed latex, foamed plastic cups, foamed plastic insulation & cushioning, foamed plastic packaging, foamed plastic products, folding doors, garbage containers, gaskets, hose, laminated thermoplastic rod, mechanical rubber goods, moldings, oil seals, pipe fittings, pipe, plastic foam carpet & rug cushions, plastic or fiberglass hot tubs, plate & sheet, siding, tubes, unsupported plastic film, unsupported plastic profiles, unsupported plastic tubes, tire inner tube unsupported, polyethylene film & sheet, unsupported polypropylene film & sheet, window frames.
Leather Products (SIC Codes 3111-3199)
Dress & casual boots, canvas & leather boots, footwear, shoes.
Insulated Wire & Heat Treated Metal Products (SIC Codes 3357, 3398)
Communications wire & cable, heat treated metal products, insulated wire & cable, nonferrous cable, nonferrous wire.
Metal Cans (SIC Code 3411)
Metal can plants manufacturing ferrous and non-ferrous metal cans, lids and ends.
Fabricated Metal Products (SIC Codes 3421-3499)
Aluminum cans, concrete re-inforcing bars, door locks & lock sets, fabricated structural steel, fabricated tanks, gas valves & parts, hand tools, heat exchangers, industrial boilers, industrial valves, marine boilers, metal & plastic faucets, metal bolts, metal control valves, metal door frames & sash, metal doors, metal furniture parts, metal machine bases, metal nuts, metal rivets, metal screws, metal stampings, pipe fittings, plate work, plumbing & heating valves, plumbing fixture fittings & trim, prefabricated metal buildings, pressed metal products, pressure vessels, screw machine products, sheet metal duct, sheet metal specialties, shipping barrels, water valves, wire & wire products.
Railroad Equipment (SIC Code 3743)
Railroad cars & car equipment, railroad car rebuilding, railroad locomotives & parts.
Machinery & Computer Products (SIC Codes 3511-3599)
Compressors (Air & Gas), agricultural implements & machinery, air filters, air-conditioning & heating combination units, air-conditioning compressors, air-conditioning condensers & condensing units, air-conditioning units, analog & hybrid computers, ball bearings & parts, computer disk drives, computer input/output equipment, computer printers, construction machinery, mining machinery & equipment, conveyor systems, digital, fans, farm machinery & equipment, gas turbines & parts, gas, oil, or water well drilling tools, hand & power residential lawnmowers, industrial fluid filters, industrial molds, industrial process furnaces, industrial pumps, industrial refrigeration machinery & equipment, industrial water treatment equipment, metal cutting dies, oil & gas field machinery & equipment, packaging machinery, personal computers, plastics working machinery, refrigeration compressors, refrigeration condensers & condensing units, ventilating blowing & exhaust fans.
Electrical Components (SIC Codes 3612-3648)
Electrical equipment plants mfg transformers, voltage regulators, relays, circuit breakers, batteries, switchgear, fuses, switches, rectifiers, motors, rotors, drives, converters, starters, coils, etc.
Printed Circuit Boards (SIC Code 3672)
Printed circuit board plants mfg printed circuit or wire boards.
Semiconductors and Related Devices (SIC Code 3674)
Semiconductor plants mfg logic modules, sensors, laser diodes, microcircuits, microprocessors, etc.
Motor Vehicles and Car Bodies (SIC Code 3711)
Automotive assembly plants fabricating automobiles, trucks, commercial light duty cars, truck & bus body plants fabricating heavy-duty truck bodies and cabs.
Motor Vehicle Body & Trailer Manufacturing (SIC Code 3713)
Bus bodies, truck bodies, truck trailers.
Motor Vehicle Parts Manufacturing (SIC Code 3714)
Motor vehicle parts manufacturing plants producing Air brakes, air-conditioners, alternators, axles, body parts, brake drums, brakes & brake parts, bumpers & bumperettes, control equipment, cylinder heads, diesel engine parts, differentials, engine manifolds, engines, exhaust systems, frames, fuel pumps, fuel systems, hose, instrument board assemblies, internal combustion engine harness wiring sets, internal combustion engine starter & starter parts, internal combustion engines, mechanical rubber goods, molding & trim, oil, fuel & air filters, parts & accessories, pistons & piston rings, pumps, radiators & radiator shells, rims & wheels, rubber tires, seat belts, seat covers, seat frames, seats, shock absorbers, springs, stampings, steering mechanisms, transmission housings, transmissions, trimmings, wiring harness sets.
Aerospace Product & Parts Manufacturing (SIC Code 3721)
Aircraft, aircraft engines & engine parts, aircraft assemblies & subassemblies, aircraft body assemblies.
Ship and Boat Building or Repairing (SIC Codes 3731-3732)
Barges, fiberglass boats, motorboats, rowboats & canoes, sailboats, shipbuilding & repair.
Other Transportation Equipment (SIC Codes 3751)
Plant engaged in manufacturing motorcycles, bicycles & parts.
Instruments & Miscellaneous Products (SIC Codes (3812-3873)
Golf club shafts, instruments & apparatus, navigational instruments, surgical appliances & supplies, surgical instruments & apparatus, temperature controls and toys.
Pharmaceutical & Biotech
Potential Key Industry Equipment Requirements
Process:
Agitators, air purification systems, air separation, analytical, boilers, centrifuge, chillers, columns (adsorption, autoclave, clean-up, distillation, extraction, recycle, rectifying, separation, etc), compressors (air & gas), condensers, controls (DCS/PLC), converters, coolers, Chromatograph (HPLC), distillation equipment, encapsulators, evaporators, dryers (kiln, rotary), evaporators, fermenters, furnaces, heaters, humidity and temperature control systems, material handling, mixing & blending equipment, precipitators, packaging, reactors (agitated, autoclave, fluid-bed, glass-lined, kettles, ss, etc.), sterilizers, stills, tablet press, utilities (steam, industrial gases, water etc.).
Environmental:
Baghouse, dust collectors, exhaust systems, fume hoods, HEPA filtration, scrubber, spill containment/liners, thermal oxidizer, wastewater treatment, water purification systems, monitors.
Plant & Project SIC Coverage
Medicinals & Botanicals (SIC 2833)
Most plant-derived drug preparations, as well as those that can be synthetically duplicated. Vitamins plus the growing sector of “alternative” and herbal remedies are also found in SIC 2833.
Pharmaceutical Preparations (SIC 2834)
Prescription and over-the-counter (OTC) drugs for human or animal use. Traditional drug therapies such as antibiotics, analgesics (any medicine intended to stop pain) and cold remedies are found in SIC 2834.
Diagnostic Substances (SIC 2835)
Materials used in the diagnosis, prognosis, prediction and prevention of disease. In vitro (an experiment performed in an artificial environment like a test tube or culture media), and in vivo (tests which are performed in a living body or organism, as well as a process or reaction in the same) diagnostics and reagents are found in this SIC.
Biological Products, Ex. Diagnostic (SIC 2836)
An umbrella term for therapies that are formulated from organisms or their cellular components. The relatively new genetically based therapies, vaccines and hematology products are among those classified as SIC 2836.
|
|
|
|
|
|
© 2009 ALL RIGHTS RESERVED. Industrial Info Resources, Inc. - Sugar Land, TX - 800-762-3361