GE Hitachi to Introduce Generation III+ Economic Simplified Boiling Water Reactors in India

---

Researched by Industrial Info Resources (Sugar Land, Texas)--GE Hitachi Nuclear Energy Incorporated (GEH) (Wilmington, North Carolina), a global nuclear power reactor manufacturing company, recently announced that it intends to introduce the 1,520-megawatt (MW) Generation III+ Economic Simplified Boiling Water Reactor (ESBWR) in India's upcoming atomic power projects. According to Jack Fuller, the president and chief executive officer of GEH, projects developed in India would have a localization factor of about 65% after the first set of reactors begins operations in the country. India also could be used as a manufacturing base for parts and components for new reactor orders across the region.

The primary new generation reactor of GEH is the 1,350-MW Advanced Boiling Water Reactor (ABWR), but that is unlikely to be introduced in India since the reactor is largely assembled in Japan, which has no active civil nuclear pacts with India, making such a transaction difficult. However, the new ESBWR will be developed almost completely in the United States, and there should be no problems in using the technology in India if the design clearances are obtained. GEH submitted its revised design documents for clearance to the U.S. nuclear regulator in September 2009, and the clearances are expected to require about 18 months to come through.

Fuller said that the design of the ESBWR incorporates an increased capacity factor and simpler systems, which translate to 35% to 40% lower operating and maintenance costs per kilowatt-hour (kWh). The ESBWR is a Generation III+ reactor and builds on GEH's existing boiling water reactors (BWRs). The advanced safety and cost-saving features in the reactor's design are expected to facilitate widespread use of the reactor. The new reactor's features include faster construction time and the ability to provide higher safety, better economics, higher operational flexibility, and more location options. Some of the featured benefits of the reactor include the capacity to remove residual heat from the system to the atmosphere in a passive way, the elimination of 11 systems in comparison to earlier BWR designs, and a 25% reduction in the requirement of pumps, motors and valves.

The Indian government has earmarked two sites for reactor vendors from the U.S.: Chhayamithi Virdi in the western coast of Gujarat, and Kovvada in the eastern coast of Andhra Pradesh. Fuller says that while GEH is satisfied with both sites, the location in Gujarat is highly favored by his company's engineers because of some technical parameters. The other U.S. company in contention for the sites is Westinghouse (Monroeville, Pennsylvania).

India is working on plans to ramp up its nuclear power capacity almost tenfold over the next decade. While indigenous Pressurized Heavy Water Reactors of 700 MW each would account for about 20% of the total nuclear power capacity, the rest would be accounted for by 1,000-MW to 1,650-MW Light Water Reactors from France, Russia and the U.S. Each of the new ESBWR reactor units is expected to take about six years to complete. Work on the first pair of units is expected to begin in 2012.

Industrial Info Resources (IIR) is the leading provider of global market intelligence specializing in the industrial process, heavy manufacturing and energy related markets. For more than 26 years, Industrial Info has provided plant and project spending opportunity databases, market forecasts, high resolution maps, and daily industry news.